4.6.6 03/14/18
  - Telnet port moved to 2232, below 1000 so IT scanner will hopefully ignore it
    - also, placing the folloing inetd.conf in micro SD root will disable telnet
        # telnet stream tcp nowait root /usr/sbin/telnetd telnetd -l /bin/login
        http stream tcp nowait root /bin/httpd /home/httpd

4.7.8 - 02/07/19
  - Fixed freeze after TCP RSTs

4.8.4 - 03/13/19
  - Added support for multiple messages on token
  - Allow Token Bytes to se set in user interface

4.8.5 - 04/04/2019
 - Class 67 Service 0x4c - Fixed

4.9.1 - 08/08/19
  - Added Service 7c to Class 67, read DH+ Diagnostic Counters
    - Allows DH+ diags to be read with Logix MSG
  - Pc3_a6_Pccc OffLink only if (DstLnk!=SrcLnk)
    - Fixes WonderWare issue
  - Fixed router function broken in 4.7.5

4.9.4 - 09/26/19
  - Fixed default link (0) router function broken in 4.7.5
  - Fixed LinkID checks that prevented off link client messages
    - Allows Eth to AN-X to DH+ to AN-X to CLX/CPX PLC5 Emulation
  - Warn instead of error if no LinkIDs defined in Router cfg
    - Allows LocalLinkID to be specified without any LinkIDs
  - Fixed CIP of DH+ functionality
    - Allows Eth to AN-X to DH+ to 1756-DHRIO to CLX
    - Kepware and others can access CLX data bridging on DH+
    - Run RSLogix bridging accross DH+
  - AnxAbDhpEnetIp  - 4.5.6
  - AnxDhpEnetCsp   - 4.4.28
  - AbDhpEnIpRouter - 4.4.25
  - DhpTrafficLog   - 4.4.1


4.10.2 - 11/18/2019 11:27AM
  - Added "DHP Capture" function
    - DHP Capture on "Configure DH+ Network" web page
    - Archive function stores /var/tmp/AnxDhpCapt.QtDhpCapt
    - Windows app AnxAbDhpCapt.exe
  - anxdhpcfg  - 4.1.1
  - anxdhpcapt - 4.1.1

4.10.3 - 11/22/2019 10:01AM
  - Fixes DHP -> AN-X -> Eth -> AN-X -> DHP routing problems

4.10.5 - 12/05/19
  - does not compress archive
    - generates tar file instead of tgz
    - much faster and consistent archive time, especially with DhpCapt
  - fixed typos related to dhp capture

4.11.1 - 10/06/2020 3:44:31 PM
  - Send FF after closing flag of packet
    - Fixes problem where old Panelview would not receive AN-X packets

4.11.2 - 09/01/2021 4:22:02 PM
  - updated dhp router app -- v4.4.27 08/31/2021 8:27:08 PM
    - if offlink pRemReq->SrcStn0 is 0, use pRemReq->Src
    - 1756-DHRIO and maybe others don't fill in SrcStn
  - new dhpcfg.cgi (v3.1.8) allows station 0 to be set and fixes error message
    about invalid station address in cfg file.
  - cleaned up error messages and </br> tags in log file display for traffic and router log pages
  
4.11.4 - 11/05/2021 9:40:51 AM
  - Firmware update provides progress updates
  - View System Log supports rotating log
  
4.12.1 - 05/24/2022 9:28:48 AM   
  - Sequence startup of AbDhpEnIpRouter, AnxAbDhpEnetIp, then AnxDhpEnetCsp
    - Solves concurrency issue that caused kernel to stop
    - LEDs would be normal but module not pingable or useable 

4.12.2 - 05/30/2022 9:32:06 AM   
  - PHY Software Reset in ProdStart
    - Fixes rare problem where Ethernet would not connect, escpecially TLK111 PHY 
    
4.12.6 - 01/12/2023 10:33:40 AM    
  - Fixes Eth->ANX->DHP->CLXETH->DHRIO->DHP->DHRIO->CLX routing
  - If RemCmd && SrlLnk==0, wait for reply	
    - AnxAbDhpEnetIp v14.5.15

4.14.1 - 2024-02-15 18:22:18
  - Fixed DhpRouter
    - DH+ messages longer than 255 bytes would fail
  - Prosoft Discovery Service Supported	
  
4.14.2 - 2024-02-20 17:43:40
  - DH+ Router Log - Fixed Router Configuratin Log