Introduction:
This is the main configuration screen for the TI RIO/Ethernet gateway product.
Directions:
The main menu, located on the left, provides a list of options that can be configured using this web interface. To see the sub-menus for each item, click on the down arrow icon beside each main option.
Menu Details:
Automation Network:
Contains all the option pages that pertain to the TI network.
TI I/O Network Configuration:
This screen is used to configure the TI IO network options of the AN-X-TI-MAS TI RIO Ethernet gateway.
Configure ControlLogix Support:
The AN-X-TI-MAS device has the ability to talk to ControlLogix family PLCs. The communication connections between the PLC and the AN-X-TI-MAS device use the Ethernet/IP protocol.
View Configuration Files:
Use this option to retrieve the current ControlLogix (Ethernet/IP) and TI network configuration files.
View Active Configuration:
Use this option to view the active configuration of the ControlLogix and the TI network.
Log Files:
Contains all the pages that provide access to log files for the AN-X device platform.
System Error Log:
This sub-menu will display the AN-X device's error log. If the AN-X-TI-MAS gateway indicates an error (system LED) then this log file may indicate the exact error, more specifically.
System Info Log:
This page will show the system's informational messages. This is handy for getting application version information and start up messages.
ControlLogix Log:
This page will show the error and informational messages that a specfically related to the AN-X-TI-MAS ControlLogix application (Automation Network menu - Configure ControlLogix Support).
View All Logs:
This page will give a list of all log files that can be viewed.
Administration:
The options in this menu are intended to provide low level access to the AN-X device. As such, great care must be taken to insure that a misconfiguration does not render your AN-X device useless. The sub-menus of this feature are password protected.
Browse File System:
Use this page to view and possibly edit the AN-X Device's file system. This allows for quick changes to the configuration of the AN-X device, but should only be used under the direction of QTS support staff.
AN-X IP Configuration:
This menu option is used to change the IP address of the AN-X device. Please consult the User's Manual for details.
